Table of Contents
Advertisement
Operating instructions TRAVELER 4all Ergo & 4you Ergo
approx. 1.1 m with manoeuvring back and
forth (much dependent on the number of
manoeuvres)
8.4
Basic equipment & dimensions
In the basic equipment, the product is
equipped with seat and back system, side
sections, caster wheels, drive wheels including
tyres and handrims, knee lever brake and foot-
rest.
Dimensions, TRAVELER 4all Ergo:
Seat width: 33-52 cm
Seat depth: 36-48 cm
Back height: 20-48 cm
Wheel camber: 1°, 4°, 6°
Back angle: Seat tube / back tube opening
angle 70°-95°
Dimensions, TRAVELER 4you Ergo:
Seat width: 33-48 cm
Seat depth: 36-48 cm
Back height: 20-48 cm
Wheel camber: 1°, 4°, 6°
Back angle: Seat tube / back tube opening
angle 70°-95°
8.5
Service life
The service life of the product is 6 years in
accordance with the medical products law.
9
Rating plate
The rating plate is located on the frame of the
product. The rating plate includes the precise
model, the serial number and other technical
specifications.
When contacting your dealer or PRO ACTIV
with regard to your product, please always
have the serial number and year of construc-
tion on the rating plate at hand.
The rating plate includes the following data:
Manufacturer
CE marking
Operating instruction present for the
product
Serial number
10 Commissioning
The product will be handed over to you ready
for use by a PRO ACTIV dealer or a field rep-
resentative or by a product consultant from
PRO ACTIV.
You will be fully instructed in the use of the
product based on the operating instructions
included in delivery. If you wish (recommended
by PRO ACTIV), you will be presented with a
record of training and a hand-over certificate
as written evidence and in addition the operat-
ing instructions and any other accessories for
your own use. The form for the record of train-
ing and the hand-over certificate can be found
in chapters 39 and 40.
It is recommended that you take along an as-
sistant to the training so that, if required, they
can assist you later when handling the product.
During the initial commissioning of the product,
drive at minimum speed and become accus-
tomed to the driving characteristics of the
product. Always adapt the speed and driving
manoeuvres to match your own abilities and
external circumstances. You will get a feel for
how to use the product safely after a short
time. Before driving up or down slopes or hills
with the product, you should be proficient in the
safe handling of the product on the flat.
6
Advertisement
Table of Contents
