Table of Contents
Advertisement
Operating instructions TRAVELER 4all Ergo & 4you Ergo
Footrest support plate
M6 fastening clamp screws
Figure 95: Footrest from below
24.2 Removing and attaching the foot-
rest
To remove the footrest, unlock the folding
mechanism (chapter 17.1), open the locking
pin lever on both sides, and then pull the foot-
rest with the support tubes from the frame
tubes.
Figure 96: Locking pin lever closed
Figure 97: Locking pin lever opened
To attach the footrest, unlock the folding
mechanism (chapter 17.1) and close the lock-
ing pin lever. Now the lever does not rest
against it completely because it is not locked
yet.
Footrest
Figure 98: Locking pin lever closed, not locked yet
Then insert the footrest with the hollow tubes
back into the frame tube until you can hear the
footrest engaging. You can see that the lock is
tight when the locking pin lever is resting firmly.
Figure 99: Locking pin lever closed and locked tight
support tubes slightly with multi-purpose
grease at regular intervals.
24.3 Footrest continuous
Figure 100: Footrest continuous
It is recommended to grease the footrest
36
Advertisement
Table of Contents
