Table of Contents
Advertisement
Operating instructions TRAVELER 4all Ergo & 4you Ergo
26.2 Integral brake
26.2.1 Opening and closing the brake
Control element
Front part of the
brake element
Figure 135: Overview of terms
Closing the brake is carried out by pressing
the front part of the control element to the right
or left outwards until the brake element rests
against the tyre. Then press the control ele-
ment (on the front part) towards the tyre until
the control element rests against the brake
element.
Press the front part of the brake
element to the outside
Figure 136: Integral brake open, closing is carried
out by pressing the control element outwards
When the brake is closed, the brake element is
positioned vertical to the brake mount.
Brake element
•
Control element rests against
the brake element
Figure 137: Integral brake closed, brake element
vertical to the brake mount
Please note that the integral brake is a
parking brake which may only be applied when
the product is at a standstill. This is not a ser-
vice brake that is suitable for reducing speed.
To open the brake, press the front part of the
control element towards the middle of the
wheelchair (away from the wheel).
Press the front part of the brake element
towards the middle of the wheelchair
Figure 138: Integral brake closed, the brake is
opened by pressing the brake element towards the
middle of the wheelchair
When opening and closing the brakes,
make sure that the control and brake element
are never grasped. Press the brake only using
one finger or with the ball of your hand on the
front part of the control element.
46
Advertisement
Table of Contents
