Answering A Call; Call Forward - Yealink SIP-T30 Quick Start Manual

Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number and press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number and press the Send soft key.
Using the headset:
1. With the headset connected, press
the headset mode.
2. Enter the number and press the Send soft key.

Answering a Call

Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
You can reject an incoming call by pressing the Reject
soft key.
Ending a Call
Using the handset:
Hang up the handset or press the EndCall soft key.
Using the speakerphone:
or the EndCall soft key.
Press
Using the headset:
Press the EndCall soft key.
Redial
• Press to enter the Placed Calls list, select the
desired entry, and press
• Press twice when the phone is idle to dial out the
last dialed number.
Call Mute
• Press to mute the microphone during a call.
• Press again to un-mute the call.
4
.
to activate
or the Send soft key.
Call Hold
To place a call on hold:
Press the Hold soft key during an active call.
To resume the call, do one of the following:
• If there is only one call on hold, press the Resume
soft key.
• If there is more than one call on hold, select the
desired call, and press the Resume soft key.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
or the Trans soft key during a call.
1. Press
2. Enter the number you want to transfer to.
or the B Trans soft key.
3. Press
Semi-Attended Transfer
1. Press or the Trans soft key during a call.
2. Enter the number you want to transfer to, and press
the Send soft key.
or the Trans soft key when you hear the
3. Press
ring-back tone.
Attended Transfer
or the Trans soft key during a call.
1. Press
2. Enter the number you want to transfer to, and press
the Send soft key.
or the Trans soft key when the second
3. Press
party answers.

Call Forward

To enable call forward:
1. Press the Menu soft key when the phone is idle,
and then select Features->Call Forward.
2. Select the desired forward type.
3. Enter the number you want to forward to. For No
Answer Forward, select the desired ring time to
wait before forwarding from the After Ring Time
field.
4. Press the Save soft key to accept the change.