Technical Data; Power; Performance - Siemens SITRANS LUT400 Operating Instructions Manual

Technical Data

Power

AC model
• 100-230 V AC ±15%, 50 / 60 Hz, 36 VA (10W)
• Fuse: 5 x 20 mm, Slow Blow, 0.25A, 250V
DC model
• 10-32 V DC, 10W
• Fuse: 5 x 20 mm, Slow Blow, 1.6A, 125V

Performance

Range
• 0.3 to 60 m (1 to 196 ft), dependent on transducer
Accuracy
(measured under Reference Conditions similar to IEC 60770-1)
• Standard operation:
• High accuracy OCM
Resolution
(measured under Reference Conditions similar to IEC 60770-1)
• Standard operation:
• High accuracy OCM
Reference operating conditions according to IEC 60770-1
• ambient temperature
• humidity
• ambient pressure
Temperature Compensation
• Range: -40 to +150 °C (-40 to +300 °F)
1.
Power consumption is listed at maximum.
2.
A high accuracy configuration consists of the LUT440 (OCM) model using XRS-5 transducer, TS-3
temperature sensor, and a Low Calibration Point of 3 m or less.
Under severe EMI/EMC environments per IEC 61326-1 the DC powered device may have an
additional error increase of up to 0.5 mm.
A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
1
±1 mm (0.04") plus 0. 1 7 % of distance
2
: ±1 mm (0.04"), within 3 m (9.84 ft) range
0. 1 % of range or 2 mm (0.08"), whichever is greater
2
: 0.6 mm (0.02"), within 3 m (9.84 ft) range
+15 to +25 °C (+59 to +77 °F)
45% to 75% relative humidity
860 to 1060 mbar g (86 000 to 106 000 N/m
1
2
g)
Page 249