Siemens SITRANS LUT400 Operating Instructions Manual page 219

The maintenance warnings and reminders are communicated to the end user
through status information. This information can be integrated into any Asset
Management system. For optimal use, we recommend that you use SIMATIC
PCS7 Asset Management Software in conjunction with SIMATIC PDM.
To access these parameters via SIMATIC PDM:
• Open the menu Device – Maintenance and select the Service Schedule
tab. (For more details see
manual.
Time Units
Allows you to set the desired units.
Options
a.
3.3.5.1.
Note: The device always operates in years. Changing the Time Units
affects only the parameter view of the Service Interval parameters in
SIMATIC PDM, PACTware FDT, and AMS.
User-configurable recommended time between product inspections
Values
a.
3.3.5.2.
Time elapsed since last service. Can be reset to zero after performing a
service.
To reset to zero:
•
•
3.3.5.3.
Read only. Time Next Service (3.3.5.3.) less Time Last Service (3.3.5.2.).
1.
Communications for SITRANS LUT400 (HART) Manual (7ML19985NE01)
A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
Maintenance
1
)
HOURS
a
DAYS
* YEARS
Units are selectable only via SIMATIC PDM, PACTware FDT, and AMS.
Service Interval
a
Units : hours, days, years
Range: 0.000 to 20.000 years
Default: 1.000 year
Units are selectable only via SIMATIC PDM, PACTware FDT, and AMS.
Time Last Service
In SIMATIC PDM, open the menu Device – Maintenance, click on the
Service Schedule tab, and click on Service Performed to restart the
timer and clear any fault messages.
Navigate to Maintenance and Diagnostics (3.) > Maintenance (3.3.) >
Service Schedule (3.3.5.) > Time Last Service (3.3.5.2.), and set to zero.
Time Next Service
in LUT400 Communications
.
Page 211