Siemens SITRANS LUT400 Operating Instructions Manual page 56

Start of QS Flow Wizard
Note:
The introduction screen is displayed only on the device when using the local
push buttons. This screen is not part of the Quick Start when using SIMATIC PDM.
Shows the type of Wizard to be executed.
Options
Transducer
Specifies the Siemens transducer connected to the device.
Options
Temperature Source
Source of the temperature reading used to adjust the speed of sound.
Options
Temperature Source
See
Fixed Temperature
Source of the temperature reading used to adjust the speed of sound.
Value
This parameter is only displayed if FIXED TEMPERATURE selected for Temperature
Source.
Primary Measuring Device
Defines the primary measuring device (PMD) to be used in the application.
Options
* Option will be set to OTHER if the wizard was run previously via HART software tool
(such as SIMATIC PDM), and the device was set to OFF or UNIVERSAL HEAD VS.
FLOW. If this is initial configuration, the PMD can only be set for no calculation (OFF),
or for linearization (UNIVERSAL HEAD VS. FLOW) via HART software tools (SIMATIC
PDM, AMS, FC375/475).
Method of Flow Calculation
Sets the method of flow calculation.
Options
Page 48 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
CANCEL, START
NO TRANSDUCER, XRS-5, XPS-10, XPS-15, XCT-8, XCT-12, XPS-30, XPS-40,
XLT-30, XLT-60, STH
Default: NO TRANSDUCER
TRANSDUCER, FIXED TEMPERATURE, EXTERNAL TS-3, AVGERAGE OF
SENSORS
Default: TRANSDUCER
on page 181 for more details.
Range: -100.0 to +150.0 °C
Default: +20.0 °C
EXPONENTIAL DEVICES, RECTANGULAR FLUME BS-3680, ROUND NOSE
HORIZONTAL CR. BS-3680, TRAPEZOIDAL FLUME BS-3680, U-FLUME BS-
3680, FINITE CREST WEIR BS-3680, THIN PLATE RECT. WEIR BS-3680, THIN
PLATE V-NOTCH WEIR BS-3680, RECT. WEIR CONTRACTED, ROUND PIPE,
PALMER BOWLUS FLUME, H-FLUME, OTHER*
Default: EXPONENTIAL DEVICES
ABSOLUTE, RATIOMETRIC
Default: ABSOLUTE
7ML1998MV01