Siemens SITRANS LUT400 Operating Instructions Manual page 61

End of QS Flow Wizard
For QS to be successful, all changes must be applied.
Options
To transfer Quick Start values to the device and return to Program menu, press
DOWN arrow
Measurement mode.
Note:
It is strongly recommended that an
completion of the wizard to ensure best accuracy. See
page 191.
A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
BACK, CANCEL, FINISH (Display returns to 1. 1 .1 Quick Start menu when Quick
Start is successfully completed or cancelled. If CANCEL is selected, no
changes are written to the device.)
(Finish). Then press LEFT arrow three times to return to
Auto Zero Head
be performed after
2.15.2. Auto Zero Head
on
Page 53