Siemens SITRANS LUT400 Operating Instructions Manual page 19

enclosure with blank lid
Note: Wall mount fasteners not included.
back of enclosure
For a more detailed dimension drawing, see
.
255
Wall mounting of the enclosure
1. Mark and drill four holes in the mounting surface for the four screws (customer
supplied).
2. Fasten with a screwdriver.
3. Line up slotted features on back of device with clips on mounting back plate. Press
the LUT400 flush against the back plate and slide downward to fasten in place.
A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
mounting back plate
slotted features
SITRANS LUT400 Dimensions on page
clips (2 places)
clips (2 places)
Page 11