Connecting; Safety Notes For Connection - Siemens SITRANS LUT400 Operating Instructions Manual

Connecting

Safety notes for connection

• Verify that all system components are installed in accordance with instructions.
• Connect all cable shields to the LUT400 shield terminals (denoted on device with
symbol
properly connected to ground.
• Keep exposed conductors on shielded cables as short as possible to reduce noise
on the line caused by stray transmissions and noise pickup.
SITRANS LUT400
A5E33329501
). To avoid differential ground potentials ensure cable shields are
SITRANS LUT400
SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
Siemens TS-3
Temperature Sensor
HART FC375/475 or a computer running
SIMATIC PDM, AMS Device Manager,
FDT, or a web browser
Customer Alarm,
Pump, or Control
Device
Customer Device with
Digital Output
Display, PLC, Chart recorder, or other
Control Device
Siemens
Transducer
Page 19