Device Status Icons - Siemens SITRANS LUT400 Operating Instructions Manual

Device Status Icons

Priority
LUI PDM
Icon Icon
Level
(red)
(yellow)
(green)
Page 232 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
Meaning
a
• Maintenance alarm
1
• Measurement values are not valid
• Maintenance warning: maintenance demanded immediately
2
• Measured signal still valid
• Maintenance required
3
• Measured signal still valid
1
• Process value has reached an alarm limit
2
• Process value has reached a warning limit
3
• Process value has reached a tolerance limit
• Configuration error
1
• Device will not work because one or more parameters/compo-
nents is incorrectly configured
• Configuration warning
2
• Device can work but one or more parameters/components is
incorrectly configured
• Configuration changed
3
• Device parameterization not consistent with parameterization
in project. Look for info text.
• Manual operation (local override)
1
• Communication is good; device is in manual mode.
• Simulation or substitute value
2
• Communication is good; device is in simulation mode or works
with substitute values.
• Out of operation
3
• Communication is good; device is out of action.
A5E33329501