2.8.3.3.
Sets the state of the discrete input (2.8.3.2.Discrete Input Number) that will
cause the Switch Alarm to activate.
Options
2.8.3.4.
Determines which relay (if any) will be activated when the Switch Alarm
activates.
Options
2.8.3.5.
Read only. Used to view the current state of the Switch Alarm.
Options
2.8.4. In-bounds Level Alarm
Reported when material level is within a user-defined range (see
2.8.4.2.High Level Value and 2.8.4.3.Low Level Value
2.8.4.1.
Enables/disables In-bounds Level Alarm.
Options
2.8.4.2.
Sets the upper level value for range within which the In-bounds Level
Alarm will activate
Values
2.8.4.3.
Sets the lower level value for range within which the In-bounds Level Alarm
will activate.
Values
Page 164
SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
Discrete Input State
Assigned Relay
Alarm State
Enable
High Level Value
.
Range: 0.000 to 99999.000
Default: 0.000
Low Level Value
Range: 0.000 to 99999.000
Default: 0.000
*
ON
OFF
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
ACTIVE
INACTIVE
ENABLED
*
DISABLED
).
A5E33329501