HP StorageWorks Director 2/140 Installation Manual page 62

Hide thumbs Also See for StorageWorks Director 2/140:

Table of Contents

The Email Event Notification Setup dialog box appears

Figure 32

Email Event Notification Setup dialog box

To enable e-mail transmission of configured addresses, select Enable Email Event Notification.

A check appears in the box when transmission is enabled.

NOTE:

The enable function must be activated for each director or switch through the Element

Manager. E-mail notification can be active for some directors or switches and inactive for others.

Enter the IP address or DNS host name of the SMTP server in the E-mail Server box. Use 64 or

fewer alphanumeric characters.

Enter the e-mail address to which e-mail replies should be sent in the Reply box.

At the Summary Interval box, enter the length of time the application should wait between

notifications. Select seconds, minutes, or hours from the associated list.

To specify users that are to receive e-mail notification, select User List.

Installing and configuring the director

(Figure

32).

Table of Contents