Record Or Verify Hafm Appliance Restore Information; Enabling Hafm To Manage The Director - HP StorageWorks Director 2/140 Installation Manual

Record or verify HAFM appliance restore information

Configuration information must be recorded to restore the HAFM appliance in case of hard drive
failure. The Windows 2000 operating system and the HAFM and director Element Manager must
also be restored. Refer to the HP StorageWorks Director 2/140 service manual for instructions.
To record or verify HAFM appliance configuration information, refer to the HP StorageWorks
HA-Fabric Manager appliance installation guide for instructions.

Enabling HAFM to manage the director

A new director must be recognized by the HAFM application to be managed. Follow these steps to
enable HAFM to recognize a new director:
1. At the HAFM application, select Discover > Setup.
The Discover Setup dialog box appears
Figure 22 Discover Setup dialog box
Click Add.
2.
The Domain Information dialog box appears with the IP Address page open
Figure 23 Domain Information dialog box (IP Address page)
3. Enter a director description in the Description box.
4. Enter the IP address you configured earlier. See "Configure director network information" on
page 39.
5. Enter the director subnet mask (determined by the customer network administrator) in the Subnet
Mask box.
46 Installing and configuring the director
(Figure 22).
(Figure 23).