Installing And Configuring The Director; Installation Options; Review Installation Requirements - HP StorageWorks Director 2/140 Installation Manual
Hide thumbs
Also See for StorageWorks Director 2/140:
- Service manual (396 pages) ,
- Product manager manual (244 pages) ,
- Installation manual (128 pages)
Table of Contents
Advertisement
2
Installing and configuring the director
This chapter describes tasks to install, configure, and verify operation of the director. This chapter
describes the following:
Installation options
The director is installed in one of the following configurations:
•
Table or desk top-One or more directors and an optional HAFM appliance are delivered and
installed at the customer facility on a desk or table top. Ethernet cabling distance and local area
network (LAN) addressing issues must be considered.
•
Customer-supplied equipment rack-One or more directors and an optional HAFM appliance
are delivered to the customer facility for installation in an HP or customer-supplied equipment
rack. Rack-mount hardware is provided in the shipping container. Ethernet cabling, distance,
and LAN addressing issues must be considered.
Review installation requirements
The director is delivered stand-alone and ready to be mounted in an HP 9000, HP 10000, HP
11000, HP system/e, or industry-standard 19-in rack. Ethernet cabling, distance, and LAN
addressing issues must be considered.
Review the following checklist before installing the switch:
•
Prepare a site plan. Consult the HP StorageWorks SAN high availability planning guide.
•
Manage the director using one of the following methods:
• A browser-capable PC and LAN segment connectivity to the HAFM appliance to support
director management through HAFM and the Element Manager.
• A browser-capable PC and Internet connectivity to support director management through the
EWS interface.
•
Verify that required technical personnel are available and scheduled for the installation.
Director 2/140 installation guide
27
Advertisement
Table of Contents
