Lan-Connect The Director - HP StorageWorks Director 2/140 Installation Manual

When the new network addresses are configured at the director, the message Request
completed OK appears at the bottom of the HyperTerminal window.
13.Select Exit from the File menu.
A HyperTerminal dialog box appears
Figure 19 HyperTerminal dialog box (1)
14.Click Yes.
A second HyperTerminal dialog box appears
Figure 20 HyperTerminal dialog box (2)
15.Click No to exit and close the HyperTerminal application.
16.Power off the maintenance terminal:
a. Select Start > Shut Down.
The Shut Down Windows dialog box appears.
b. Select Shut down and then click OK to power off the PC.
17. Disconnect the RS-232 null modem cable from the director and the maintenance terminal.
Replace the protective cap over the maintenance port.
18.IPL the director.

LAN-connect the director

Use these steps to connect the rack-mounted director to the Ethernet LAN segment.
44 Installing and configuring the director
(Figure 19).
(Figure 20).