Figure 2–8: Switch Hardware View page
4. Inspect switch status at the Hardware View page and perform one of the
a. If the switch displays operational (no FRU alert symbols and a green circle at
the alert panel), go to
b. If switch operation displays degraded or a switch failure is indicated (FRU
alert symbols and a yellow triangle or red diamond at the alert panel), refer to
the hp StorageWorks edge switch 2/32 service manual to isolate the problem.
Task 9: Configure Feature Key (Optional)
Perform this task to display or install operating features that are available as
customer-specified options. Available features include the:
Open systems management server (OSMS)
edge switch 2/32 installation guide
Installing and Configuring the Edge Switch 2/32
"Task 11: Set Switch Date and
Time" on page 2–21.