Cancelling A Wash Program And Stopping The Machine - Wexiodisk WD-90 DUO Installation And User Manual

Using the dishwasher

4.2.4 Cancelling a wash program and stopping the machine

Potwash programs
For potwash, there are six different programs to choose from, three where gran-
ules are used for the wash (P1–P3) and three without granules (P4–P6). The se-
lected program is shown on the display (1) in the same way as for the normal
wash programs.
• Pressing the button for potwash programs (3) once, twice or three times
selects potwash programs P1–P3. For these three programs, cleaning of
the items to be washed is intensified by the addition of granules. Programs
(P1–P3) are best used for washing items which are very heavily soiled.
• Pressing the button (3) four, five or six times selects potwash programs
P4–P6, which are potwash programs without granules.
• Pressing the button (3) seven times selects program P0, which results in
the machine being set to standby mode for washing.
The potwash programs are differentiated not just by the use or otherwise of gran-
ules, but also the time the wash cycle takes, see "Technical data" on page 57.
Granule collection program
The granule collection program is used to collect the granules in the machine in
a special basket when the amount of granules is to be checked or the granules
cleaned. The procedure for collection of granules is described under "Checking
the amount and cleaning the granules" on page 46.
Pressing button (4) once activates the granule collection program. Pressing it
twice activates program 0 – standby mode.
Cancelling a wash program
It is possible to cancel a selected wash program at the start, provided washing
has not actually begun. This is achieved by opening the hood using the button for
hood operation. It is also possible to change a selected program before the hood
has managed to close ready to start the program. This is achieved by pressing
the program selection buttons.
Stopping the machine
If for any reason you need to stop the dishwasher while it is running, press the
button for switch-on/switch-off.
WD-90 DUO
36
Rev. 0 (201401)