Safety Instructions; General Information; Transport - Wexiodisk WD-90 DUO Installation And User Manual

Safety instructions

2. Safety instructions

2.1 General information

STOP
STOP

2.2 Transport

STOP
The machine is CE marked, which means that it complies with the requirements
of the EU machinery directive with regard to product safety. Product safety means
that the design of the machine will prevent personal injury or damage to property.
Modifying the equipment without the approval of the manufacturer will invalidate
the manufacturer's product liability.
To further improve safety during installation, operation and servicing, the operator
and the personnel responsible for installing and servicing the machine should
read the safety instructions carefully.
Switch off the dishwasher immediately in the event of a fault or malfunction. The
machine must only be repaired by trained engineers. The regular checks de-
scribed in the installation and user manual must be carried out in accordance with
the instructions. The machine must be serviced by personnel authorised for this
purpose by the manufacturer. Use original spare parts. Contact an authorised
service company to draw up a programme of preventative care and maintenance.
Hazardous situations may arise if the instructions above are not followed.
Before the machine enters service, ensure that the staff are given the necessary
training in handling and looking after the machine.
Handle the machine with care during unloading and transport; there is a risk of it
tipping over.
WD-90 DUO
4
Rev. 0 (201401)