Wexiodisk WD-90 DUO Installation And User Manual page 56

Using the dishwasher
Machine faults and user errors
If a fault occurs on the machine, an alarm appears on the panel display. Alarms
are displayed in order of priority, i.e. if several alarms are activated at the same
time, the one which is highest in the list is displayed first.
Some alarm texts warn when something is wrong, whereas others just provide in-
formation. Some alarms only occur if the machine has certain additional options,
such as e.g. an extra HACCP alarm.
Panel for program selection, start and stop, etc.
1. Display
2. Selection of normal wash programs
3. Selection of potwash programs
4. Granule collection
5. Activation of service mode
6. Page selection in service mode
7. Alarm reset
8. On / Off
9. Hood, up/down
Next to the panel button for alarm reset is a LED which illuminates red when an
alarm is activated. If the alarm can be reset with the reset button, the LED flashes,
but if it cannot, the LED will be constantly lit.
Generally, if the actions proposed below do not solve the problem, or if the alarm
returns repeatedly in succession, you should contact the service company for
them to deal with the fault.
WD-90 DUO
52
Rev. 0 (201401)
1
2
3
4
5
6
7
8
9
25-4-00-003_1