Using the dishwasher
4.3.8 Checking the hood's anti-crushing system
Operation of the hood's anti-crushing system must be checked once a month. It
should also be checked by a service engineer whenever the machine is serviced.
1.
Open the hood. Press the button for operating the hood (at the very bottom
of the panel).
2.
Hold a piece of wood or similar against the edge on the lower part of the
machine.
3.
Press the button for operating the hood (at the very bottom of the panel).
4.
Once the hood has gone down far enough to reach the piece of wood and
start pressing on it, the hood should reverse and return to its open position.
The sensitivity of the anti-crushing system may need adjusting from time to time.
If so, a service engineer must be called.
WD-90 DUO
48
Rev. 0 (201401)
25-4-05-001