Safety instructions
2.3 Installation
STOP
2.4 Detergent and drying agent
STOP
2.5 Operation
2.5.1 Hot water
STOP
This symbol on a machine component warns of the presence of electrical voltage.
The component may only be disconnected by a qualified electrician. Make sure
the machine is non-live (turn off the power at the mains switch) before any work
is performed on the machine. The electronics in the machine are sensitive to elec-
trostatic discharge (ESD). For this reason, an anti-static wristband must be used.
Connection of water should only be undertaken by qualified personnel.
Water pipes must be connected in a way that complies with the regulations of the
local water supply company. Check that the water and steam connections are
tight and free of leaks before the machine is started up.
Make sure that the mains voltage is the same as that indicated on the machine's
rating plate. The machine must be connected to a lockable mains switch.
Only detergent and drying agent intended for industrial dishwashers may be
used. Ordinary washing-up liquid must not be used in the machine or for soaking.
Contact your detergent supplier regarding the choice of a suitable detergent.
Be aware of the risks involved in handling detergents and drying agents. Protec-
tive gloves and safety glasses should be used when handling dishwasher deter-
gent. Read the warning text on the detergent and drying agent containers as well
as the detergent supplier's instructions.
The temperature of the wash and rinse water is 58°C and 85°C, respectively.
WD-90 DUO
5
Rev. 0 (201401)