Figure 19-2 Network Topology Of The Ipv6 Static Route Configuration Between Ce And Pe - Zte ZXR10 ZSR V2 Configuration Manual

ZXR10 ZSR V2 Configuration Guide (IPv6)
Figure 19-2 Network Topology of the IPv6 Static Route Configuration Between
CE and PE
Configuration on CE1:
CE1(config)#interface gei-1/1
CE1(config-if-gei-1/1)#ipv6 enable
CE1(config-if-gei-1/1)#ipv6 address 1001::20:1/96
CE1(config-if-gei-1/1)#exit
CE1(config)#interface gei-1/2
CE1(config-if-gei-1/2)#ipv6 enable
CE1(config-if-gei-1/2)#ipv6 address 1001::10:2/120
CE1(config-if-gei-1/2)#exit
CE1(config)#ipv6 route 2002::0/96 1001::10:1
Configuration on PE1:
PE1(config)#ipv6 route vrf vpn_a 1001::0/96 1001::10:2
PE1(config)#router bgp 100
PE1(config-bgp)#address-family ipv6 vrf vpn_a
PE1(config-bgp-af-ipv6-vrf)#redistribute static
PE1(config-bgp-af-ipv6-vrf)#exit
4. Configure RIPng between a CE and a PE.
Step
1
2
SJ-20140504150128-018|2014-05-10 (R1.0)
Command
ipv6 router rip vrf <vrf-name>
ZXR10(config)#
ZXR10(config-ripng-vrf-vrf-name)#
[metric <metric-value>],[route-map <map-tag>]
redistribute bgp
19-4
ZTE Proprietary and Confidential
Function
Enables RIPng and enters
RIPng configuration mode.
Redistributes BGP to RIPng.