Chapter 12 Mld Configuration - Zte ZXR10 ZSR V2 Configuration Manual

Command
ZXR10(config-mcast-ipv6-mld)#
{default | group-list |<access-list-name>}<source-address>
5. Configure restriction on packet loss allowance.
You can configure it in instance mode or in interface mode.
precedence.
Command
ZXR10(config-mcast-ipv6-mld)#
<times>
ZXR10(config-mcast-ipv6-mld-if-interface-
name)#
6. Configure the MLD group function.
Step
1
2
3
4
5
6
SJ-20140504150128-018|2014-05-10 (R1.0)
robustness-count <times>
Command
ipv6 multicast-routing
ZXR10(config)#
ZXR10(config-mcast-ipv6)#
ZXR10(config-mcast-ipv6-mld)#
<interface-name>
ZXR10(config-mcast-ipv6-mld-if-interface-
access-group <access-list-number>
name)#
ZXR10(config-mcast-ipv6-mld-if-interface-
join-group <group-address>
name)#
ZXR10(config-mcast-ipv6-mld-if-interface-
static-group <group-address>[source
name)#
{<source-address>[{include | exclude}]| ssm-map}]
Function
Configures the SSM-mapping function
ssm-map static
to specify the source address range in
a group list of MLDv1. Default group
range: FF3*/32.
Function
Restriction on number of packets
robustness-count
allowed to be lost. Range: 2–7,
default: 2.
Restriction on number of packets
allowed to be lost. Range: 2–7,
default: 2. Interface mode takes
precedence.
router mld
interface
12-3
ZTE Proprietary and Confidential

Chapter 12 MLD Configuration

The latter takes
Function
Enters multicast configuration
mode.
Enters MLD configuration
mode.
Enters MLD interface
configuration mode.
Configures the range of
groups allowing MLD join.
Configures the MLD interface
as a member in a static group
for sending report packets.
Configures the MLD interface
as a member in a static group.