Route Configuration - Zte R800 Handbook

translation.
External Area It generally refers to the external area of the
device, namely the Wan address, including port
address and VPN tunnel address.
External Port Port used by the destination address in the IP
packet
Internal Area It generally refers to the LAN address of the device,
generally the LAN port
Internal IP Original destination address as the address upon
replacement
Internal Port Original port as the port upon replacement
5.5.3. R C
OUTE ONFIGURATION
Static routing provides a specific forwarding path for the router to forward packets and must be manually configured by the
user. Static routing includes static routing and policy-based routing in terms of its form. Static routing is selected based on the
destination address while policy-based routing is selected based on the source address (the router detects the source address of the
received forward packets and, based on the source address, forward with the corresponding routing). And policy-based routing has
priorities ranging from 3～252, where a smaller number indicates a higher priority. There is also a priority between static routing and
policy-based routing: policy-based routing has a higher priority than static routing.
Step 1: Log onto the WEB configuration interface of R800 LTE Router as provided in "5.2.1 Log onto the WEB Configuration
Interface". Click "Forwarding Settings > Route Configuration", as shown in Figure 5-5-3.
Click "Create" to create a static routing rule, as shown in Figure 5-5-4
TCP+UDP

TCP

UDP

WAN, generally referring to the external address of the device
Range: 1~65535. Specify a single port or use '-' to determine the
range.
Select LAN
A.B.C.D interface pattern or A.B.C.D/M
Range: 1~65535. Specify a single port or use '-' to determine the
range.
Figure 5-5-3 Routing Tab
53
R800
HANDBOOK