Zte ZXR10 ZSR V2 Configuration Manual page 136

ZXR10 ZSR V2 Configuration Guide (IPv6)
ipv6 router isis
$
$
</route_isis>
R2(config)#show running-config isis
! <route_isis>
router isis 44
area 44
system-id 2222.2222.2222
is-type level-1-2
metric-style wide
address-family ipv6
multi-topology
$
interface gei-2/2
ipv6 router isis
$
$
</route_isis>
The route-map configuration is as follows.
R1(config)#show route-map testisisv6
[route-map testisisv6] IP type: IPv6
route-map testisisv6 permit 10
set ipv6 metric 10
The static route configuration is as follows.
R1(config)#show ipv6 forwarding route static
IPv6 Routing Table:
Headers: Dest: Destination, Gw: Gateway, Pri: Priority;
Codes : K: kernel, I1: isis-l1, SFN: sf-nat64, R: ripng, AF: aftr, B: bgp,
Dest
Interface
1:2:3::/64
gei-1/2
On R2, check the IS-ISv6 routing information that is advertised by R1.
R2(config)#show ipv6 protocol routing isis
IPv6 Routing Table
Codes: D - Direct, A - Address, S - Static, R - RIP, UI - USER_IPADDR,
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS static,
O - OSPF intra, OI - OSPF inter, E1 - OSPF ext 1, E2 - OSPF ext 2, N - ND,
B - BGP, IB - IBGP, EB - EBGP, AG - BGP AGG, V - VRRP, P - PPP, D6 - DHCPv6,
SFN - Stateful NAT64, SLN - Stateless NAT64, AF - AFTR
SJ-20140504150128-018|2014-05-10 (R1.0)
D: direct, I2: isis-l2, SLN: sl-nat64, O: ospfv3, D6: dhcp, P: ppp,
S: static, N: nd, V: vrrp, A: address, M: multicast, UI: user-ipaddr;
Pri Gw
1 192:168::1:2
Owner Metric
S 0
9-12
ZTE Proprietary and Confidential