Zte ZXR10 ZSR V2 Configuration Manual page 173

Step
2
3
4
8. Verify the configurations.
Command
ZXR10#
SJ-20140504150128-018|2014-05-10 (R1.0)
Command
ZXR10(config-mcast-ipv6-mld)#
time <seconds>
ZXR10(config-mcast-ipv6-mld-if-interface-
query-max-response-time <seconds>
name)#
ZXR10(config-mcast-ipv6-mld)#
<seconds>
ZXR10(config-mcast-ipv6-mld-if-interface-
querier-timeout <seconds>
name)#
ZXR10(config-mcast-ipv6-mld)#
terval <seconds>
ZXR10(config-mcast-ipv6-mld-if-interface-
last-member-query-interval <seconds>
name)#
show ipv6 mld interface [<interface-name>]
query-max-response-
querier-timeout
last-member-query-in
Function
Displays MLD configuration on an
interface.
12-5
ZTE Proprietary and Confidential
Chapter 12 MLD Configuration
Function
1–65535, default: 125, unit:
second.
Configures the maximum
response time carried in the
query message sent by the
MLD protocol in instance
mode. Range: 1–25, default:
10, unit: second.
Configures the maximum
response time carried in
the query message sent
by the MLD protocol in
interface mode, which takes
precedence. Range: 1–25,
default: 10, unit: second.
Configures the time-out
duration of the MLD querier
in instance mode. Range:
60–300, unit: second.
Configures the time-out
duration of the MLD querier in
interface mode, which takes
precedence. Range: 60–300,
unit: second.
Configures the interval of the
MLD special group query in
instance mode. Range: 1–25,
default: 1, unit: second.
Configures the interval of the
MLD special group query in
interface mode, which takes
precedence. Range: 1–25,
default: 1, unit: second.