Zte ZXR10 ZSR V2 Configuration Manual page 275

Step
group : the concerned group.
object: the concerned object.
string, name of the concerned group or object.
link-type: the link type, used for tracking the link status of the local device.
peer-type: the peer type, used for tracking the link status of the peer device.
priority-decrement<1-254>: specifies the value deducted from the priority of a router.
3. Verify the configurations.
SJ-20140504150128-018|2014-05-10 (R1.0)
Command
ZXR10(config-vrrp-if-interface-name)#
track interface <interface-name>[priority-decrement
<1-254>| rapid-down]
ZXR10(config-vrrp-if-interface-name)#
out-interface <interface-name>
ZXR10(config-vrrp-if-interface-name)#
track { group | object}<string>{ link-type | peer-type |
priority-decrement <1-254>}
ZXR10(config-vrrp-if-interface-name)#
accept [disable]
ZXR10(config-vrrp-if-interface-name)#
check-ttl [disable]
ZXR10(config-vrrp-if-interface-name)#
admin-group { owner | interface <interface-name> vrid
<1-255>}
Chapter 23 IPv6 VRRP Configuration
vrrp <vrid>
vrrp <vrid>
vrrp <vrid>
vrrp <vrid>
vrrp <vrid>
vrrp <vrid>
23-3
ZTE Proprietary and Confidential
Function
Configures a VRRP track
interface in VRRP interface
configuration mode.
When the priority decrement
is not configured, the default
value (10) is used.
Configures VRRP heartbeat in
VRRP interface configuration
mode, that is, configuring a
VRRP packets out-interface.
Configures the detection
group, object and policy for
VRRP tracking.
Enables the accept function in
VRRP interface configuration
mode, default: Enable.
Enables the check-ttl
function in VRRP interface
configuration mode, default:
Enable.
Configures VRRP
administration group
function in VRRP interface
configuration mode.
owner, sets the VRRP group
as a management group,
in charge of receiving and
sending messages, and
managing status.