Snmp Configuration Example; Figure 6-1 Snmp Configuration Example Topology - Zte ZXR10 ZSR V2 Configuration Manual (System Management

ZXR10 ZSR V2 Configuration Guide (System Management)
<auth-password>: authentication password (or authentication key), range: 1–31
characters. If it is an encrypted password, its range is 32–40 characters.
<priv-password>: clear text encryption password, range: 1–32 characters.
11. Verify the configurations.
Command
ZXR10#
ZXR10#
ZXR10#
ZXR10#
ZXR10#
ZXR10#
ZXR10#
ZXR10#
ZXR10#
include}<line>]
– End of Steps –

6.1.3 SNMP Configuration Example

Configuration Description
By configuring the SNMP function, a user can use a network management server to
manage the devices in the network, see

Figure 6-1 SNMP Configuration Example Topology

SJ-20140504150128-007|2014-05-10 (R1.0)
show snmp
show snmp config
show snmp engine-id
show snmp group
show snmp security
show snmp security failures
show snmp security trust-users
show snmp user
show running-config snmp [|{begin | exclude |
Function
Displays SNMP state attributes.
Displays the configurable SNMP state
attributes.
Displays the local SNMP engine ID.
Displays the configured SNMP groups.
Displays the configurations of SNMP
security.
Displays the IP addresses and number of
times of wrong community login attempts
in SNMP detection mode.
Displays the trusted users learned by
SNMP dynamically and configured
manually.
Displays the information on configured
SNMP users.
Displays the configurations of SNMP.
Figure 6-1.
6-6
ZTE Proprietary and Confidential