Zte ZXR10 ZSR V2 Configuration Manual page 249

Chapter 19 6VPE Configuration
P(config-ldp-1)#exit
Configuration on PE2 (here an Ethernet sub-interface is used to connect to CE2):
PE2(config)#ip vrf test1
PE2(config-vrf-test1)#rd 100:1
PE2(config-vrf-test1)#address-family ipv6
PE2(config-vrf-test1-af-ipv6)#route-target import 100:1
PE2(config-vrf-test1-af-ipv6)#route-target export 100:1
PE2(config-vrf-test1-af-ipv6)#exit
PE2(config-vrf-test1)#exit
PE2(config)#interface loopback1
PE2(config-if-loopback1)#ip address 10.10.3.3 255.255.255.255
PE2(config-if-loopback1)#exit
PE2(config)#interface gei-1/6
PE2(config-if-gei-1/6)#ip address 10.10.23.3 255.255.255.0
PE2(config-if-gei-1/6)#no shutdown
PE2(config-if-gei-1/6)#exit
PE2(config)#interface gei-1/7.10
PE2(config-if-gei-1/7.10)#exit
PE2(config)#vlan-configuration
PE2(config-vlan)#interface gei-1/7.10
PE2(config-vlan-if-gei-1/7.10)#encapsulation-dot1q 10
PE2(config-vlan-if-gei-1/7.10)#exit
PE2(config-vlan)#exit
PE2(config)#interface gei-1/7.10
PE2(config-if-gei-1/7.10)#ip vrf forwarding test1
PE2(config-if-gei-1/7.10)#ipv6 enable
PE2(config-if-gei-1/7.10)#ipv6 address 2002::20:2/120
PE2(config-if-gei-1/7.10)#exit
PE2(config)#router ospf 1
PE2(config-ospf-1)#network 10.10.0.0 0.0.255.255 area 0.0.0.0
PE2(config-ospf-1)#exit
PE2(config)#ipv6 router ospf 2 vrf test1
PE2(config-ospfv3-2)#router-id 2.2.2.2
PE2(config-ospfv3-2)#interface gei-1/7.10 area 0.0.0.0
PE2(config-ospfv3-2-if-gei-1/7.10)#exit
PE2(config)#router bgp 100
PE2(config-bgp)#neighbor 10.10.1.1 remote-as 100
PE2(config-bgp)#neighbor 10.10.1.1 update-source loopback1
19-15
SJ-20140504150128-018|2014-05-10 (R1.0) ZTE Proprietary and Confidential