Step 1: Selecting The Directory; Step 2: Accessing The Directory; Internal Ldap Directory Screen - Stormshield SN series Configuration Manual

Step 1: Selecting the directory

As indicated above, the LDAP database option has to be selected in order to confirm your choice.
This is the first step in the configuration of a directory.
Select the option Connect to an internal LDAP directory and click on Next.

Step 2: Accessing the directory

In this second step, you will need to enter general information concerning the LDAP database that
you wish to create. The information entered here will reappear in your firewall's LDAP directory
schema.
Name
Organization
Domain
Password
Confirm
Mandatory password
strength
Only the password can be modified later, after you have configured your internal LDAP.
Click on Finish to display the internal LDAP directory screen.

Internal LDAP directory screen

Once the configuration of the LDAP directory is complete, you will arrive at the internal LDAP
screen which sets out the following items:
Configuration
Enable user directory This option allows starting the LDAP service.
Organization
Domain
Username
Password
Confirm
Mandatory password
strength
Page 98/448
Name enabling the identification of the internal LDAP directory when several
directories have been defined on the firewall.
Name of your company (e.g.: COMPANY).
The country in which your company is located (e.g.: fr).
Definition of the Stormshield Network Admin password.
Confirmation of the LDAP administration password that you have just entered in the
previous field.
This field indicates your password's level of security: "Very Weak", "Weak", "Medium",
"Good" or "Excellent".
You are strongly advised to use uppercase letters and special characters.
NOTE
If this option is not selected, the module will be inactive.
This field will contain the name of your company, entered earlier.
This field will contain your company's domain.
The login that will allow you to connect to the internal LDAP base.
The password allowing the firewall to connect to the directory.
This password can be modified.
Confirmation of the LDAP administration password that you have just entered in the
previous field.
This field indicates your password's level of security: "Very Weak", "Weak", "Medium",
"Good" or "Excellent".
You are strongly advised to use uppercase letters and special characters.
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
DIRECTORIES CONFIGURATION