Advanced Properties; Web Servers" Tab; Adding A Web Server - Stormshield SN series Configuration Manual

Advanced properties

Access to servers via SSL VPN
Prefix for the URL root
directory
HTTP header for user
ID
Client workstation configuration
Command executed at
startup
Command executed
during shutdown

"Web servers" tab

This section groups the servers configured for access to web resources.
The number of web servers that can be configured varies according to the appliance model:
Model
SN150, SN160w, SN200 ,
SN210w, SN300
U30S, U70S
SN510, SN500, SN710, SN700
U150S, U250S
NG1000-A
SN910, SN900, SN2000,
U500S,U800S
NG5000-A
SN3000, SN6000

Adding a web server

To add a web access server, the procedure is as follows:
Click on Add then select one of the suggested servers. A screen containing server names will
appear.
Page 335/448
Stormshield Network's SSL VPN technology enables masking the real addresses of
servers to which users are redirected, by rewriting all URLs contained in HTTP pages
visited. These URLs will then be replaced by a prefixed followed by 4 digits. This field
enables defining the prefix to be used.
This field's value will be sent to the web server in the HTTP header of outgoing queries,
along with the user's login. This value can be used for checks and/or transparent
authentication on the source of the queries.
In the event the server to which HTTP traffic is redirected requests authentication, a
login can be defined in the header of the HTTP packet. This login may be useful in
indicating, for example, that this traffic arriving on the server come from the firewall
and can be accepted by the server without authentication.
This command, which is executed when the applet is launched, allows the
administrator to define actions to perform before displaying the applet. For example,
this command may launch a script (installed on a server) which will modify the
parameters of the user's mail account in such a way that when the applet is launched,
SMTP and POP traffic will be automatically redirected, all without the user's
intervention.
This command, which is launched when the applet is shut down, allows the
administrator to define actions to perform before shutting down the applet. For
example, this command may launch a script (installed on a server) which will modify
the parameters of the user's mail account in such a way that when the applet is shut
down, SMTP and POP traffic will no longer be automatically redirected, all without the
user's intervention.
Max. no. of HTTP servers
64
128
256
256
512
512
SNS - USER CONFIGURATION MANUAL V.3
Max. no. of other servers
64
128
128
256
256
512
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
SSL VPN PORTAL