Others - Stormshield SN series Configuration Manual

Others

This section is dedicated to the rest of the protocols that you may encounter but which have not
been covered above.
This screen is divided into five columns:
Protocol name
Default port
Default SSL port
Automatic detection
Status
Click on Apply to save your changes.
Page 288/448
Name given to the protocol
The name of the port assigned by default:
A new port can be created by clicking on
Name of the port assigned to the default protocol.
You can choose to enable or disable automatic protocol detection:
As all protocols are enabled by default, double-click on the column to disable the
automatic detection of the relevant protocol.
You can choose to enable or disable the selected protocol.
As all protocols are enabled by default, double-click on the column to disable the
automatic detection of the relevant protocol. Repeat the operation when you wish to
re-enable it.
SNS - USER CONFIGURATION MANUAL V.3
to the right of the column.
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
PROTOCOLS