Network objects can also be created during the construction of the filter policy (during the
stages of selecting sources and destinations).
Selecting a filter policy
In the Configuration menu, click on Security policy > Filter –
NAT . Select the filter policy to modify.
You can rename this policy by clicking on Edit > Rename .
Adding a filter rule
In the Filtering tab, click on New rule > Standard rule .
A new rule, which is disabled by default, is created:
State
Double-click on the value off in the Status column. The status of the rule will
change to on .
Action
Double-click on the value Block in the Action column:
In the Action field, select pass,
In the Log level field, select log if you want traffic matching this rule to be reflected in the IPS-
Firewall's filter logs.
Page 389/448
REMARK
SNS - USER CONFIGURATION MANUAL V.3
HOW TO: IMPLEMENTING A FILTER RULE
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016