Port Group; Router - Stormshield SN series Configuration Manual

Port group

This screen will allow you to aggregate your ports by category.
Example
A "mail" group that groups "imap", "pop3" and "smtp" ports.
Name of the object
Comments
Edit this group
Objects in this group

Router

Router objects can be used:
As the firewall's default gateway,
l
For specifying the type of routing in filter rules (PBR: Policy Based Filtering).
l
Router objects are defined by a name and at least a gateway used. It may contain one or several
gateways used and backup gateways. A mechanism that tests the availability of these gateways
allows providing a concept of redundancy – if no responses are received from one or several
main gateways, one or several backup gateways will then take over.
Select a router to view or edit its properties.
Name of the object
Comments
Button bar
Add
Delete
Move to the list of
backups/Move to the
list of main gateways
Page 243/448
Name given to the port group during its creation.
Description of the port group.
This button contains a dialog box for adding ports to the group.
By clicking on it, you will be able to change the name of the group and add comments
to it and also search for ports and include new ports in the group.
Two columns will appear:
The left column contains the list of all the ports that you may add to your group.
The right column contains the ports that are already in the group.
To add a port to the group, you need to move it from one column to the other:
Select the item(s) to add.
Click on this arrow . The object will move to the right column and become a part
of your group (at the top of the list).
To remove an object from the group, select it in the right column and click on this arrow
.
NOTE
By clicking on the button "Edit this group", you will be able to change the name
of the group and add comments to it and also search for objects and include
new objects in the group.
The ports in your group will be shown in a table.
To add or modify objects, refer to the previous field.
Name given to the router object when it was created.
Description associated with the router object.
Adds a gateway.
Deletes the selected gateway.
Allows switching from one gateway in the main table to the backup table or vice versa.
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
NETWORK OBJECTS