Protocols; Search; List Of Protocols; Profiles - Stormshield SN series Configuration Manual

PROTOCOLS

This module contains the list of the various protocols that can be configured from your web
interface.
It is divided into 2 distinct zones:
Protocols (left column)
l
Profiles that can be assigned to the protocols and their parameters (right column)
l
The zone for profiles is empty by default and allows you to select a protocol in the left column.

Search

The search bar allows locating the protocol to be configured by entering the first few letters of its
name. Clicking on the desired protocol allows working directly with it.

List of protocols

Select the protocol that you wish to configure in the list displayed. Once the protocol has been
selected, you can start configuring it.

Profiles

Selecting a profile

These application profiles contain the configuration of the protocol scan, which is capable of
raising alarms. An inspection profile is made up of a set of application profiles per protocol. By
default, the inspection profile IPS_00 contains the application profiles protocole_00, and so on.
These are the inspection profiles that will be applied in the filter policy.
For information, in factory configuration the inspection profile IPS_00 is intended for internal
interfaces, applied to incoming traffic. The profile meant for public interfaces applied to outgoing
traffic is the profile IPS_01.
The drop-down list offers 10 profiles, numbered from 00 to 09.
Each profile has by default the name of the protocol, accompanied by its number.
Examples:
http_00
l
(1) http_01...
l
Page 250/448
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
PROTOCOLS