Advanced Properties - Stormshield SN series Configuration Manual

Reservation
Gateway
Primary DNS
Secondary DNS
Domain name

Advanced properties

Other types of servers to be used can be sent to client workstations through the DHCP service.
WINS server
SMTP server
POP3 server
NTP Server
News Server (NNTP)
TFTP Server
Distribute the Web
proxy autodiscovery
(WPAD) file
Update DNS server
entries
Assigned lease time
Page 94/448
This field contains the name of the network object (host) that has a reserved IPv4
address.
This field allows assigning a specific default gateway for each DHCP client that has
reserved addresses.
Select a host network object from the drop-down list. If no objects are selected, the
value "default" will be displayed in this column. The host selected in the Default
gateway field in the Settings section will then be used as the gateway for the client.
This field allows assigning a specific main DNS server to each DHCP client using
address reservation.
Select a host network object from the drop-down list. If no objects are selected, the
value "default" will be displayed in this column. The host selected in the Primary DNS
field in the Default settings section will then be used as the DNS server for the client.
This field allows assigning a specific secondary DNS server to each DHCP client using
address reservation.
Select a host network object from the drop-down list. If no objects are selected, the
value "default" will be displayed in this column. The host selected in the Secondary
DNS field in the Default settings section will then be used as the DNS server for the
client.
This field allows indicating a specific domain name that will be used by the DHCP
client for its DNS resolution.
If no name is specified, the value "Default domain" will be displayed in this column.
The domain name indicated in the Domain name field in the Default settings section
will then be used for the client.
Sends the WINS server's address to DHCP clients. WINS is a Microsoft NETBIOS name
server (NBNS). WINS eliminates the need to broadcast data in order to resolve host
names according to their IP addresses.
The SMTP server is used for sending e-mails. A drop-down list allows selecting the host
object that corresponds to this server.
The POP3 server is used for receiving e-mails. A drop-down list allows selecting the
host object that corresponds to this server.
This field allows sending the NTP servers' addresses to DHCP clients. If clients have
been configured to synchronize their NTP clocks, these servers have to be used as a
time reference.
This field allows sending the news server's address to DHCP clients. This server
provides the NNTP service, which allows clients to read Usenet news.
The TFTP server is used for booting hosts remotely.
This field (option 150: TFTP server address) can be used for starting up network
devices such as routers, X-terminals or workstations without hard disks.
If this option has been selected, the DHCP server will distribute the internet access
configuration to DHCP clients through a PAC file (Proxy Auto Configuration). This file
must be entered in the authentication settings (Captive portal tab in the menu
Configuration>Users>Authentication). It can be made accessible from internal and/or
eternal interfaces (Internal interfaces and External interfaces tabs in the menu
Configuration>Users>Authentication).
If this option has been selected, DNS servers will be dynamically updated when
information contained in the DHCP server is modified.
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
DHCP