Stormshield SN series Configuration Manual page 268

List of generic FTP commands and details of filtering
ABOR: Command that interrupts the transfer in progress. This command does not accept
l
arguments. By default, a scan will be performed to check RFC compliance.
ACCT : Command that specifies the account to be used for connecting. This command
l
accepts only a single argument. By default, a scan will be performed to check RFC
compliance.
ADAT: Command that sends security data for authentication. This command accepts only a
l
single argument. By default, a scan will be performed to check RFC compliance.
AUTH: Command that selects the security mechanism for authentication. This command
l
accepts only a single argument. By default, a scan will be performed to check RFC
compliance.
CCC: Command that allows unprotected messages.
l
CDUP: Command that modifies the parent working folder. This command does not accept
l
arguments . By default, a scan will be performed to check RFC compliance.
CONF: Command that specifies the "confidential" message used for authentication.
l
CWD: This command modifies the working folder. This command accepts one or several
l
arguments. By default, a scan will be performed to check RFC compliance.
ENC: This command specifies the "private" message used for authentication. This command
l
accepts only a single argument. By default, a scan will be performed to check RFC
compliance.
EPRT: This command enables the extended active transfer mode. This command accepts
l
only a single argument. By default, a scan will be performed to check RFC compliance.
EPSV: This command selects the extended passive transfer mode. This command has to be
l
executed with at most one argument. This command is blocked by default.
FEAT: This command displays the extensions supported by the server. It does not accept
l
arguments. The result of this command is filtered by the proxy if filtering has been
requested on the FEAT command.
HELP: This command returns the details for a given command. This command has to be
l
executed with at most one argument. By default, a scan will be performed to check RFC
compliance.
LIST: This command lists the contents of a data location in a friendly way.
l
MDTM : This command displays the date of the last modification for a given file. This
l
command accepts one or several arguments. By default, a scan will be performed to check
RFC compliance.
MIC: This command specifies the "safe" message used for authentication. This command
l
accepts only a single argument. By default, a scan will be performed to check RFC
compliance.
MLSD: This command displays the contents of the normalized folder. By default, a scan will
l
be performed to check RFC compliance.
MLST: This command displays the information of the normalized folder. By default, a scan
l
will be performed to check RFC compliance.
MODE: This command specifies the transfer mode. By default, a scan will be performed to
l
check RFC compliance. This command is the object of a greater filter. It is only allowed with
the arguments S, B, C and Z. If the antivirus analysis has been enabled, only argument S will
be allowed.
Page 268/448
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
PROTOCOLS