Mgcp; Profiles Screen; Rtp; Ips" Tab - Stormshield SN series Configuration Manual

Allow dynamic opening
of MS RPC services
connections
Block services
provided by other
servers than the
EPMAP server
Only relay to Microsoft
Exchange services
Support
Disable intrusion
prevention

MGCP

Profiles screen

"IPS" tab

Automatically detect
and inspect the
protocol
MGCP session parameters
Maximum command
size (bytes)
Max no. of parameters
per command
Maximum SDP
parameter size (bytes)
Maximum idle time
(seconds)
Support
Disable intrusion
prevention

RTP

"IPS" tab
List of supported RTP codecs
This list contains the RTP codecs supported by default.
You can add codecs by clicking on the appropriate button or remove them from the list by
selecting them and clicking on "Delete".
Page 281/448
This option allows MS RPC services to open connections without having to authorize
them explicitly with a filter rule.
If this option has been selected, only services relayed by the connection's recipient
EPMAP server will be authorized.
If this option has been selected, only Microsoft Exchange services will be relayed by
the EPMAP server.
When this option is selected, the scan of the EPMAP protocol will be disabled and
traffic will be authorized if the filter policy allows it
If this protocol has been enabled, it will automatically be used for discovering
corresponding packets in filter rules.
A command can contain between 32 and 1024 bytes.
The number of parameters that can appear in a command has to be between 32 and
1024 bytes.
The SDP parameter automatically validates the launch of applications in a session
from the client's www or by mail. Its size has to be between 32 and 1024 bytes.
The maximum idle duration for a session has to be between 60 and 604800 bytes.
When this option is selected, the scan of the MGCP protocol will be disabled and traffic
will be authorized if the filter policy allows it.
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
PROTOCOLS