Stormshield SN series Configuration Manual page 269

NLST: This command lists the contents of a data location of the computer in a friendly way.
l
By default, a scan will be performed to check RFC compliance.
NOOP: This command does not do anything. It does not accept arguments. By default, a
l
scan will be performed to check RFC compliance.
OPTS: This command specifies the status options for the given command. This command
l
accepts one or several arguments. By default, a scan will be performed to check RFC
compliance.
PASS : This command specifies the password used for the connection. This command
l
accepts only a single argument. By default, a scan will be performed to check RFC
compliance.
PASV: This command selects the passive transfer mode. This command does not accept
l
arguments. By default, a scan will be performed to check RFC compliance.
PBSZ: This command specifies the size of encoded blocks. This command accepts only a
l
single argument. By default, a scan will be performed to check RFC compliance.
PORT: This command selects the active transfer mode. This command accepts only a single
l
argument. By default, a scan will be performed to check RFC compliance.
PROT: This command specifies the level of protection. By default, a scan will be performed to
l
check RFC compliance. This command is the object of a greater filter. It is allowed only with
the arguments C, S E and P.
PWD: This command displays the current working folder. This command does not accept
l
arguments. By default, a scan will be performed to check RFC compliance.
QUIT: This command terminates the session in progress and the connection. By default, a
l
scan will be performed to check RFC compliance.
REIN : This command terminates the session in progress (initialized with the user). By
l
default, a scan will be performed to check RFC compliance.
REST: This command specifies the offset with which the transfer has to catch up. By default,
l
a scan will be performed to check RFC compliance. This command is the object of a greater
filter. It is prohibited if the antivirus scan is running. Otherwise, the proxy will check that a
single argument is present.
RETR: This command retrieves a given file. This command accepts one or several arguments.
l
By default, a scan will be performed to check RFC compliance
SITE: This command executes a command specific to the server. This command accepts
l
only a single argument. By default, a scan will be performed to check RFC compliance.
SIZE: This command displays the transfer size for a given file. This command accepts one or
l
several arguments. By default, a scan will be performed to check RFC compliance.
SMNT: This command modifies the data structure of the system in progress. This command
l
accepts one or several arguments. By default, a scan will be performed to check RFC
compliance.
STAT: This command displays the current status. By default, a scan will be performed to
l
check RFC compliance.
STRU: This command specifies the structure of transferred data. By default, a scan will be
l
performed to check RFC compliance. This command is the object of a greater filter. It is
allowed only with the arguments F, R and P. If the antivirus scan has been enabled, only
the argument F will be allowed.
SYST: This command displays the information about the server's operating system. This
l
command does not accept arguments. By default, a scan will be performed to check RFC
Page 269/448
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
PROTOCOLS