Step 2; Modifying A Modem; Pppoe Modem - Stormshield SN series Configuration Manual

Step 2

Routing: use the gateway obtained by the modem
Select whether you wish to define the modem as a gateway.
To the list of main
gateways
To the list of backup
gateways
Do not add (configure
later)

Modifying a modem

PPPoE modem

Use this modem
Name (mandatory)
Comments
Modem type
Color
Authentication
Identifier
Password
Connectivity
The modem is
connected to the
interface
Query domain name
servers and create
associated host
objects
Advanced properties
Service
Connection
Page 199/448
The host Firewall_ <name of modem>_peer will be added to the main gateways. If there
is no main gateway, a window will appear asking if you wish to define a main gateway
(default router).
The host Firewall_ <name of modem>_peer will be added to the secondary gateways.
The modem has not been defined as a gateway.
By selecting this option, you will enable the modem.
Name given to the modem. (See warning in the introduction to the chapter on
Interfaces)
Allows you to enter comments regarding the modem.
Indicates the type of modem chosen in the creation phase.
Color assigned to the modem.
Name used for authentication
Password used for authentication. If you click on the key icon to the right of the field,
the password will appear in plaintext for 5 seconds.
Indicates the modem's connection interface.
If this option is selected, the firewall will retrieve DNS servers from the DHCP server it
contacts (access provider, for example) to obtain its IP address.
Two objects will be dynamically created in the object database upon the selection of
this option: Firewall_<interface name>_dns1 and Firewall_<interface name_dns2. They
can then be used in the configuration of the DHCP service. So, if the Firewall provides
the users on its network with a DHCP service, the users will also benefit from the DNS
servers given by the access provider.
Type of PPPoE service used. This option allows distinguishing between several ADSL
modems. Leave this field empty by default.
Connection when there is traffic (on demand) establishes a connection with the
internet only when a connection request is made by the internal network (this is more
economical than in the case of a link that is charged by duration). The Permanent
connection keeps the connection to the internet permanently active.
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
INTERFACES