Stormshield SN series Configuration Manual page 394

State
Double-click on the value off in the Status column.
The status of the rule will change to on.
Action
Double-click on the value Block in the Action column:
In the Action field, select pass,
l
In the Log level field, select log if you want traffic matching
l
this rule to be reflected in the IPS-Firewall's filter logs.
Source
Double-click on the value Any in the Source column. In the
Source hosts field, select the network object Internet.
Destination
Double-click on the value Any in the Destination column:
In the Destination hosts field in the General tab, select
l
your network object Pub_FW,
Page 394/448
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
HOW TO: SETTING UP A NAT RULE