Activating The Filter Policy; Testing The Filter-Nat Policy - Stormshield SN series Configuration Manual

In the NAT on the destination / Destination field in the
l
Advanced properties tab, select your object Priv_
Webserver.
Destination port
Double-click on the value Any in the Destination port
column. For the Destination port field, select HTTP.
The filter and NAT rule will then look like this:
It is certainly possible to complete this rule with extended Stormshield Network firewall
features (customized security inspection profiled, scheduling, etc).

Activating the filter policy

At the bottom of the Filter-NAT window, click on Save
and apply.
Confirm by clicking on Yes, activate the policy.
The active policy is recognizable by the icon

Testing the Filter-NAT policy

You have reached the end of the procedure, and your web server must be accessible from an
external client workstation. In a web browser, type the server's URL, for example, "http://Fw_
public_address".
If the intranet server's home page does not appear, check the following points:
Page 395/448
NOTE
SNS - USER CONFIGURATION MANUAL V.3
.
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
HOW TO: SETTING UP A NAT RULE