Stormshield SN series Configuration Manual page 234

User
Source
Source name
Source MAC address
Source port
Source Port Name
Destination
Destination Name
Destination Port
Dest. Port Name
Source interf.
Dest. interf.
Sent
Received
Duration
Last used
Router
Router name
Rule type
Rule
Status
Queue name
Possible actions
Several search criteria can be combined. All of these criteria have to be met in order to be
displayed, as the search criteria are cumulative.
This combination of search criteria can then be saved as a "filter". Filters will then be saved in
memory and can be reinitialized in the Preferences module of the administration interface.
(Filter drop-down
menu)
Save
Delete
Page 234/448
User logged on to the host (if any).
IP address of the host at the source of the connection
Name of the object (if any) corresponding to the source host.
MAC address of the object at the source of the connection
Number of the source port used for the connection
Name of the object corresponding to the source port
IP address of the host to which the connection was set up.
Name of the object (if any) to which the connection was set up.
Number of the destination port used for the connection
Name of the object corresponding to the destination port
Name of the interface on the firewall on which the connection was set up.
Name of the destination interface used by the connection on the firewall.
Number of bytes sent during the connection.
Number of bytes received during the connection.
Connection time.
Time elapsed since the last packet exchange for this connection.
ID assigned by the firewall to the router used by the connection
Name of the router saved in the objects database used by the connection
Indicates whether it is a local, global or implicit rule.
ID name of the rule that allowed the connection
This parameter indicates the status of the configuration corresponding, for example, to
its initiation, establishment or closure.
Name of the QoS queue used by the connection.
Select a filter to launch the corresponding search. The list will suggest filters that have
been saved previously and for certain Views, predefined filters. Selecting the entry
(New filter) allows reinitializing the filter by selecting the criteria selection.
Save as a customized filter the criteria defined in the Filter panel described in the next
section. You can save a new filter using the button "Save as" based on an existing
filter or a predefined filter offered in certain Views. Once a filter has been saved, it will
be automatically offered in the list of filters.
Delete a customized filter saved earlier.
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
MONITORING