Management Information Bases (Mibs) - Stormshield SN series Configuration Manual

DESCRIPTION "A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected
that the ifOperStatus object for one of its communication links left the down state and
transitioned into some other state (but not into the notPresent state). This other state is indicated
by the included value of ifOperStatus."
::= { snmpTraps 4 }
Stormshield Network Traps
.1.3.6.1.4.1.11256.1.5
Stormshield Network traps are defined in the file MIB Stormshield Network-ALARM-MIB.txt
time
srcif
src
dst
msg
time
srcif
src
dst
msg
The notification "ntqAMessage" contains the message associated with the alarm or the
system event. Documentation on alarms is available online in the security KB, or
accessible via the administration interface, in the System events module when you click
on the Show help link for each event.
The descriptions of system alarms are also given in the chapter SYSTEM EVENTS in the
section List of events.

Management information bases (MIBs)

Stormshield Network MIBs
Here is the list of fields of Stormshield Network MIBs, CLI commands corresponding and console
commands.
The links can be downloaded from:
.1.3.6.1.4.1.11256.1.5
==> Contents of logs
Contains 2 tables :
Alarms
Page 315/448
.0.1.1
.0.1.2
.0.1.5
.0.1.6
.0.1.11
.1.1.1
.1.1.2
.1.1.4
.1.1.5
.1.1.10
NOTE
https://www.stormshield.eu/landing/mibs/
NETASQ-SMI-MIB: Mib as a whole
NETASQ-ALARM-MIB: Table of alarms
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
SNMP AGENT