Sandboxing; Sns-En-User_Configuration_Manual-V3 - Copyright © Stormshield - Stormshield SN series Configuration Manual

If you have logged on via the web administration interface to a firewall attached to an SMC
server, "Managed by SMC - Emergency mode" will be displayed in the upper panel. By
default, the account used only has read-only access privileges.
You are strongly advised against directly modifying the configuration of a firewall
administered by an SMC server, except in an emergency (SMC server uncontactable, for
example).
This is because any changes made directly to the configuration via the web administration
interface on a firewall attached to an SMC server may be overwritten when a new
configuration is sent from the SMC server.
Status of the service
IP Address
Logged on/ Logged off
since
Last deployment
number
Last configuration
update

Sandboxing

If your firewall has the sandboxing option, this panel will allow you to show the status of the
connection to the service as well as the latest scan statistics.
Status of the service
Criticality of the last
malicious file detected
Nature of the last
malicious file detected
Last malicious file
detected on
Page 91/448
IMPORTANT
Indicates the status of the connection between the firewall and the SMC server.
IP address of the SMC server.
Specifies the time/date from which the firewall has been logged on to or logged off
from the SMC server.
Indicates the number of the last deployment carried out by the SMC server on the
firewall.
Indicates the last date on which the configuration was sent from the SMC server to the
firewall.
Indicates the status of the connection between the firewall and the Stormshield
sandboxing servers.
This indicator will only be displayed when a file scanned by sandboxing has been
deemed malicious. It will then be presented in the form of a score ranging from the
detection threshold of a malicious file (set by default to 80) to 100.
This indicator will only be displayed when a file scanned by sandboxing has been
deemed malicious. In this case, it will set out the nature of the malware (e.g.: "variant
of Win32/SNS.Test").
This indicator will only be displayed when a file scanned by sandboxing has been
deemed malicious. In this case, it will set out the date and time the malware was
detected (format: YYYY-MM-DD HH:MM:SS).
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
DASHBOARD