Return Routes" Tab; Button Bar; Presentation Of The Table - Stormshield SN series Configuration Manual

Once the configuration has been sent to the firewall, and if there are syntax errors, a
message indicating the row numbers containing errors will inform the user of the need to
correct the configuration.

"Return routes" tab

When several gateways are used for load balancing, this tab will allow defining the gateway
through which return packets will need to go in order to guarantee the consistence of
connections.
If the gateway selected from the drop-down list is a host object, this object must specify a
MAC address.

Button bar

Add
Delete
Apply
Cancel

Presentation of the table

The table sets out four fields of information:
State
Interface (Mandatory) A drop-down list allows selecting the outgoing interface for the return route.
Gateway (Optional)
(Optional) Comments Any text.
Page 306/448
WARNING
REMARK
Adds an "empty" return route. An added route (sending of a command) is effective
only if its fields Gateway and Interface have been entered.
Deletes the selected route.
Sends the configuration of the return routes.
Cancels the configuration of the return routes.
Status of the static routes:
Enabled: Double-click to enable the route created.
Disabled: The route is not functional. The line will be grayed out in order to reflect
this.
Clicking on this column will open the objects database in order to select a host or a
virtual interface (IPSec). If the object is a host object, it must specify a MAC address.
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
ROUTING