Stormshield SN series Configuration Manual page 212

HybridMode
InterfaceRoute
LBDialup
QoS
VLAN
Proxy
Antispam
Antivirus
FTPProxy
HTTPProxy
ICAPURL
ICAPVirus
IMAPProxy
POP3Proxy
SMTPProxy
SpamVendor
URLFiltering
URLVendor
VirusVendor
Department
Authentication
DHCP
DNS
DynDNS
Enrolment
LDAPBase
NTP
PublicLDAP
SNMP
VPN
Anonymous
PPTP
SSL
StrongEnc
Tunnels
This tab works in the same way as the local license tab.
Page 212/448
Enables or disables hybrid mode on interfaces (mix of interfaces, bridges, VLANs, etc).
(Default value: 1*).
Allows routing by interface. This option is enabled by default.
See the Menu: Configuration > Network > Interfaces / Advanced properties tab/
Bridge: routing by interface (Default value: 1).
Enables or disables load-balancing on dialups. (Default value: 1).
Enables or disables QoS. (Default value: 1).
Enables or disables VLANs (Default value: 1).
Enables or disables spam filtering via DNSRBL in the proxy. (Default value: 1).
Enables or disables the ClamAV antivirus in the proxy. (Default value: 1).
Enables or disables the FTP proxy. (Default value: 1**).
Enables or disables the http proxy (Default value: 1).
Enables or disables the ICAP ReqMod. (Default value: 1).
Enables or disables the ICAP RespMod. (Default value: 1).
Enables or disables the IMAP proxy (which does not exist on UTMs). (Default value: 1).
Enables or disables the POP3 proxy. (Default value: 1).
Enables or disables the SMTP proxy. (Default value: 1).
Enables or disables the spam filter heuristic engine. (Default value: 0).
Enables or disables URL filtering via Stormshield Network's database in the proxy.
(Default value: 1).
Enables or disables URL filtering via Stormshield Network Extended Web Control
database in the proxy. (Default value: 0).
Enables or disables the Kaspersky antivirus in the proxy. (Default value: 0).
Enables or disables the user authentication interface.
Enables or disables DHCP server/relay service (Default value: 1).
Enables or disables DNS cache service. (Default value: 1).
Enables or disables the DynDNS client of the DNS update server.
Enables or disables enrolment. (Default value: 1).
Enables or disables the internal LDAP database (Default value: 1).
Enables or disables NTP synchronization (Default value: 1).
Enables or disables public access to the internal LDAP (Default value: 1*).
Enables or disables the SNMP agent. (Default value: 1*).
Enables or disables the possibility of setting up anonymous tunnels. (Default value:
1*).
Enables or disables PPTP tunnels. (Default value: 1*).
Enables or disables SSL VPN.
Enables or disables support for strong algorithms for the encryption of IPSec tunnels.
(Default value: 1*).
Maximum number of IPSec tunnels. (Default value: 0 (=unlimited)).
SNS - USER CONFIGURATION MANUAL V.3
sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
LICENCE