General Description - Aquatronica evolution ACQ110 Instruction Manual

General description

The "AQUARIUM CONTROLLER" is electronic and easy to use, allowing you to manage all of
the electrical appliances in an aquarium. It can be used for both soft water and salt water aquari-
ums.
The main components of the system are: an electronic control unit for setting and viewing all
parameters and a power unit to which the various appliances are connected.
Other accessories are also available for increasing the system's performance (e.g. reading of chemi-
cal values, electrodes, level sensors, modules, etc.).
For a complete overview of available accessories, visit www.aquatronica.com.
The "AQUARIUM CONTROLLER EVOLUTION" has the following main functions:
• Visually displays data on the blue graphic screen.
• The "password" menu allows you to enable a PIN security code to prevent unauthorised persons
from involuntarily modifying any settings.
• The "multitimer" function commands in an ON/OFF mode (using the power unit) and can acti-
vate and deactivate movement pumps, neon and incandescent lights, heaters, coolers, skimmers,
and other elements.
• The "electronic agenda" function allows the user to write and save reminders and, if desired,
program repeatable reminders. These notices are displayed at the desired moment, accompanied
by an acoustic signal.
• The "data readings" function measures and displays the data read by the sensors so the various
devices connected to the system can consequently be adjusted.
• The "tide effect" alternately activates two movement pumps with fixed cycles of 6 hours
15 minutes each (tide time).
• The "wave effect" function allows the alternate activation of two or three movement pumps with
cycles that can be chosen by the user, from a minimum of 1 second to a maximum of about
5 minutes.
• The "summer" function activates the heating cable underneath the gravel for fixed intervals of
5 minutes/hour even in the summer when it is normally not used.
• The "power cut" function, in the case in which power supply is lacking, displays the duration of
the interruption. If the interruption continues for more than an hour, the outputs selected in the
menu remain disabled when the power returns.
• The "software reprogramming" function is the feature that places this product above all others
in its category. With a serial interface and a PC it is possible to update the control unit with functions
which were not present at the moment of purchase, without having to change it.
7 - 60
IsACQ110C-0 (ENG) Rev.230708-0