Language
English
(Fig. 3)
Date/Time
Time: 09:30
Date: 02/06/08
(Fig. 4)
New device connected
PU01
_
(Fig. 5)
New device connected
S01
Temperature
(Fig. 6)
IsACQ110C-0 (ENG) Rev.230708-0
Getting started
Language (Fig. 3)
Select the communication language with the "AQUARIUM
CONTROLLER EVOLUTION".
To change the language, proceed as follows:
• Select with keys the desired language and press "Enter".
Date/Time (Fig. 4)
Set the time and date with which the controller will manage
all of the outputs and programming.
To modify these parameters, proceed as follows:
• Select the digit to modify with keys while with keys
choose the correct one.
Press "Enter" when finished.
Power Unit (Fig. 5)
Insert the desired name for the connected Power Unit.
To modify the name, proceed as follows:
• Select the letter to insert with keys while using keys
to move within the word.
Press "Enter" when finished.
NOTE: this screen will appear every time an additional
Power Unit is connected.
Temperature Sensor (Fig. 6)
Insert a name for the connected temperature sensor.
To modify the name, proceed as follows:
• Select the letter to insert with keys while using keys
to move within the word.
Press "Enter" when finished.
NOTE: this screen will appear every time an additional
temperature sensor is connected.
16 - 60